| Input Power Supply | 3-phase 380V & Single-phase 220V (30KVA) |
| Dimensions (mm) | 2000（L）*1200（W）*2000（H） |
| Rotary Worktable | Rotational Speed (rpm): 0.01-1.5 |
| Table Diameter (mm)（mm):700 |
| Tilting Angle: 0゜- 90゜ |
| Servo Motor：0.75KW |
| Cross Slide | Adopts high-precision ball screw. Positioning accuracy: 0.2 mm, maximum travel: 600 mm. It automatically performs multi-pass and multi-layer welding. Equipped with memory and error-proof functions for welding origin and torch alignment position, as well as fast adjustment and fine tuning modes. |
| Welder Oscillator | Effective Stroke（mm):0-100 |
| Oscillation Width (mm):0.1-100 (Edge dwell time, oscillation speed and amplitude are adjustable) |
| Overload(Kg)：40 |
| Welding Power Source | Panasonic TIG Welder(YC-400TX) Plasma torch working current: 20-220A. The 200A welding machine is used for arc striking. |
| Digital control via analog interface |
| Cooling System | Temperature control range: 5℃-30℃ (Freon refrigeration, 2HP compressor)；Water tank capacity: 30L；Stainless steel water pump: Head 13m, rated flow 4.2m³/h |
| Wire Feeding Assembly | Wire guide tube for 3.2–5 mm wires (1m/1.5m straight wires and partial spooled wires applicable), with photoelectric detection.Optional multi-wire feed box with small air cylinder: holds 9 pcs of 5 mm wires or 10 pcs of 4 mm wires. |
| Powder Feeding Unit | The powder hopper is made of high-transparency acrylic, with a 15kg capacity and tiltable design for easy powder discharging. It adopts roller-type powder feeding with a feeding rate of 5–60 g/min. |
| Controller （PLC） | Equipped with PLC for coordinated operation of all components. Welding parameters are storable; the system can save up to 50 process recipes.Water flow, air pressure and other detection & protection functions are displayed on a 10-inch touch screen with alarm output. |
